wolrabn
May 1, 02:21 AM
Hi guys,
wondered if someone can help at all. Have searched the net quite extensively with this one - I'm now under the assumption the logic board will need replacing unless anyone can tell me otherwise?
I'll list as much info as I can if you need anything else let me know.
Got an iPhone 3g from a friend that only powers in DFU mode when connected to the mac/pc.
Blank screen permanently on.
All restores return error code 6.
2 different usb cables tried, tested on OSX 10.6.7, windows 7 + sp1 and xp sp3 (xp is virtual).
I do not know what version firmware was previously on it.
I have tried to restore official 2.0.1, 2.1, 3.1.2, 3.1.3, 4.1, 4.2
I have tried custom firmware on 3.1.3, 2.1, 4.1
I have attempted jailbreak with redsn0w, pwnagetool, ziphone
redsn0w seems to work then instead of booting to springboard the iphone just reverts back into dfu.
I have checked the logs of these restores and noticed this:
Error setting variable - 'boot-args': (iokit/common) general error
error setting 'boot-args' to '': 1
to which a little googling led me to a possibility with logic board.
I have tried using iRecovery but to be honest unsure where to go with it i also tried TinyUmberella which attempted to fix recovery and the phone didnt reboot. just stayed in dfu.
Although this is in DFU i have kept making a point of making sure i manually place it into DFU when attempting restores just to make sure its not in recovery mode (though i doubt it ever has been as it has never shown the 'connect to itunes' message- just always a blank screen unless recovering.
Recovery for all firmware seems to get 99% of the way before showing error 6.
Does anyone know a way of fixing this issue or do I give up and sell for spares/repair?
Thanks
wondered if someone can help at all. Have searched the net quite extensively with this one - I'm now under the assumption the logic board will need replacing unless anyone can tell me otherwise?
I'll list as much info as I can if you need anything else let me know.
Got an iPhone 3g from a friend that only powers in DFU mode when connected to the mac/pc.
Blank screen permanently on.
All restores return error code 6.
2 different usb cables tried, tested on OSX 10.6.7, windows 7 + sp1 and xp sp3 (xp is virtual).
I do not know what version firmware was previously on it.
I have tried to restore official 2.0.1, 2.1, 3.1.2, 3.1.3, 4.1, 4.2
I have tried custom firmware on 3.1.3, 2.1, 4.1
I have attempted jailbreak with redsn0w, pwnagetool, ziphone
redsn0w seems to work then instead of booting to springboard the iphone just reverts back into dfu.
I have checked the logs of these restores and noticed this:
Error setting variable - 'boot-args': (iokit/common) general error
error setting 'boot-args' to '': 1
to which a little googling led me to a possibility with logic board.
I have tried using iRecovery but to be honest unsure where to go with it i also tried TinyUmberella which attempted to fix recovery and the phone didnt reboot. just stayed in dfu.
Although this is in DFU i have kept making a point of making sure i manually place it into DFU when attempting restores just to make sure its not in recovery mode (though i doubt it ever has been as it has never shown the 'connect to itunes' message- just always a blank screen unless recovering.
Recovery for all firmware seems to get 99% of the way before showing error 6.
Does anyone know a way of fixing this issue or do I give up and sell for spares/repair?
Thanks
miamijim
Apr 11, 05:43 AM
Comes in White & Black battery powered, 10 hours battery life with quick recharge time for the ladies.....
(No pics needed use your imagination)
(No pics needed use your imagination)
appleboyy
Mar 24, 11:40 AM
would be useful if anyone could spare some time in the queue to keep a site updated with a liveblog/livefeed
www.ipad2queue.co.uk
PM if you wanna help
www.ipad2queue.co.uk
PM if you wanna help
Designer Dale
Apr 8, 01:39 PM
Thanks dude! Appreciate it
more...
Combat Boots
ass-kicker combat boots on
more...
volzalum
Mar 17, 12:28 PM
Here is my set-up that works very well and is stable:
3 ATV2 (each to seperate Home theater receiver)
2 Airport Express (each to seperate receiver)
1 1TB Time Capsule
1 3TB Seagate USB 2.0 (only store iTunes media on it)
1 old Dell Inspiron 8500 Laptop
I have the TC connected to the cable modem
I have the 3TB Harddrive connected to the TC
I have the Dell Computer connected by ethernet cable to the TC
Each of the ATV2's and AE's are connected wirelessly to the TC
I use the Dell as my iTunes Server and have it mapped to the iTunes library on the 3TB Harddrive. I can stream music to all 5 devices without any fading or delays. I can stream video to any of the ATV2's with no issues. Each of the ATV2s can access the shared iTunes library with no issues.
Movies typically start playing on the ATV2's after about 10 seconds and are usually fully loaded in about 10 minutes (typical file size is 1-2GB).
I use multiple iPhones (3Gs and 4) and iPad 1 to control the Dell iTunes library when streaming music. I also have two MBPros connected wirelessly to the TC and a 320GB NAS. I only use the TC for backup of 1 of the MBP's.
3 ATV2 (each to seperate Home theater receiver)
2 Airport Express (each to seperate receiver)
1 1TB Time Capsule
1 3TB Seagate USB 2.0 (only store iTunes media on it)
1 old Dell Inspiron 8500 Laptop
I have the TC connected to the cable modem
I have the 3TB Harddrive connected to the TC
I have the Dell Computer connected by ethernet cable to the TC
Each of the ATV2's and AE's are connected wirelessly to the TC
I use the Dell as my iTunes Server and have it mapped to the iTunes library on the 3TB Harddrive. I can stream music to all 5 devices without any fading or delays. I can stream video to any of the ATV2's with no issues. Each of the ATV2s can access the shared iTunes library with no issues.
Movies typically start playing on the ATV2's after about 10 seconds and are usually fully loaded in about 10 minutes (typical file size is 1-2GB).
I use multiple iPhones (3Gs and 4) and iPad 1 to control the Dell iTunes library when streaming music. I also have two MBPros connected wirelessly to the TC and a 320GB NAS. I only use the TC for backup of 1 of the MBP's.
marshallbedsaul
Mar 21, 11:17 PM
Hello,
more...
combat boots
Winter oots fashion is never
more...
combat boots black photography
style of this combat boot
more...
black leather combat boot
Refugee Combat Boot by Joie
more...
Combat Boots From Military
lace up combat boots,
more...
military/combat boots that
oot, combat boots, cute,
more...
combat boots - plaid
Open toe combat boots?
The combat boots 2008
more...
BoyBach
Mar 31, 07:57 AM
...or is the existance of multiple versions just a means of generating revenue?
How could you ever suggest such a thing! For shame!
( ;) )
I think that the difference between the different versions of Pokemon is that each version has a few of it's own 'exclusive' Pokemon monsters. So you need to 'trade' them with gamers who have the other version to complete the set.
"Gotta catch 'em all"
How could you ever suggest such a thing! For shame!
( ;) )
I think that the difference between the different versions of Pokemon is that each version has a few of it's own 'exclusive' Pokemon monsters. So you need to 'trade' them with gamers who have the other version to complete the set.
"Gotta catch 'em all"
tersono
Apr 4, 01:13 AM
I'd consider upgrading. The 8600m is something of a timebomb and is likely to fail at some point.
more...
trainguy77
Nov 18, 10:50 AM
Care to elaborate? Since I updated to 1.72 I haven't had any problems with it... I just completed my first WU for Team MacRumors!
Our friend there is on PowerPC. His production is.......lacking.:D You have time for now......but not for long!!!! I am putting out over 1000 points a day I will catch you!
Our friend there is on PowerPC. His production is.......lacking.:D You have time for now......but not for long!!!! I am putting out over 1000 points a day I will catch you!
motomullet
Jan 9, 10:46 PM
I can't help you on the 2tb drives, but I do have a 1tb western digital green in mine.
From what I read, some drives need to be throttled to sata 1.5 in order to be recognized. This is done with a jumper on two of the pins next to the sata plug (which pins depends on the drive)
I believe I have my drive jumpered, and I think I had to reformat it once when I put it in because of the large block size.
At any rate, its in there, and it works.
From what I read, some drives need to be throttled to sata 1.5 in order to be recognized. This is done with a jumper on two of the pins next to the sata plug (which pins depends on the drive)
I believe I have my drive jumpered, and I think I had to reformat it once when I put it in because of the large block size.
At any rate, its in there, and it works.
more...
WinterMute
Jul 10, 06:45 PM
Same problem with the cover on the 17" PBook, but a Swiss Army knife blade works very nicely wgen you haven't got the right driver.
daniel767
Apr 25, 06:53 PM
Yes I say a 'cracked' version because I don't know if he paid for it or not, and I didn't pay for it, my choice of words, i admit, was not very good!
I apologize to all those who really hold the rules of these forums so close to their hearts. I don't however believe I have broken the rules but if you feel otherwise I hope my apology puts a smile on your face and makes your day just that bit better! ;)
I apologize to all those who really hold the rules of these forums so close to their hearts. I don't however believe I have broken the rules but if you feel otherwise I hope my apology puts a smile on your face and makes your day just that bit better! ;)
more...
d4nn0
Dec 16, 04:42 PM
thanks for the advice... unfortunately warranty was up in july, but luckily it's still working fine... it's as if it worked the problem out of its system or something haha. I'm just gonna hope that I keep having good luck and wait for the mactels :cool:
nfocus design
Nov 4, 03:54 PM
I have a 23" and haven't had any problems with it. I have seen some pink ones in the store, but mine has been fine. Even if you got one and it was pink, just calibrate it and you should be fine.
more...
johnfkitchen
May 5, 12:04 PM
This has been very helpful to me, thanks! My iMac will arrive in June, but I'm trying to get ready for fast-tracking the migration.
In my case, I plan to have most of my data files on the 2TB hard drive, but some data files on the SSD. For example, my Aperture library (which will reference most of the images) will likely benefit from the speed, so will be on the SSD.
So where should I be putting my Home Folder? And how will the home folder know about subfolders being on a different drive? Do I set up aliases? I have not used aliases, but I'm happy to do what it takes! :)
Thanks.
In my case, I plan to have most of my data files on the 2TB hard drive, but some data files on the SSD. For example, my Aperture library (which will reference most of the images) will likely benefit from the speed, so will be on the SSD.
So where should I be putting my Home Folder? And how will the home folder know about subfolders being on a different drive? Do I set up aliases? I have not used aliases, but I'm happy to do what it takes! :)
Thanks.
SixPants
Apr 8, 07:46 PM
You know, after 16 years on the Internet you'd think I'd know how to find ***** by now.
Thanks much. No idea why I only looked on eBay and Craigslist.
If only they made a website where I could search a whole BUNCH of websites at once. Hmmmmmmmm......
Thanks much. No idea why I only looked on eBay and Craigslist.
If only they made a website where I could search a whole BUNCH of websites at once. Hmmmmmmmm......
more...
jeffs177
May 5, 05:16 PM
No, because it only applies to Macs bought at one of the listed locations.
I see, I'm going to read over the Terms And Conditions after work.
One part says "For the purpose of these Terms and Conditions, the �time of purchase� may extend from the day of your Mac purchase until the end of Apple�s 14-day return period".
I guess it still implys that I need to purchase the computer from Apple and only Apple, but that I have two weeks to purchase the 1 to 1.
I see, I'm going to read over the Terms And Conditions after work.
One part says "For the purpose of these Terms and Conditions, the �time of purchase� may extend from the day of your Mac purchase until the end of Apple�s 14-day return period".
I guess it still implys that I need to purchase the computer from Apple and only Apple, but that I have two weeks to purchase the 1 to 1.
Blackhatch
Apr 5, 08:46 PM
Ive actually had decent results with the GoPro as far as a cheap camera goes. With your above requests that camera would suffice. However I wouldnt use it for ENG, Docs (well maybe as B-roll) or anything thatll need low-light.
Now of your budget is over 1k then we can talk better cameras ;)
Currently testing a Sony PMW-F3. Its the new Sony HD camera that can handle all kinds of lenses (PL yada yada).
We generally use the high-end stuff here at work e.g. RED MX but at times we have to purchase and assess lower end cameras for other depts.
If you need something to be safe around or in water, you cant go wrong with the GoPro. It impresses me more every time I use it. It isn't the most user friendly, but "bang for your buck" is, IMO, off the chart.
Ive been playing with one for a little over a month and it does some awesome stuff. Since I've had it I have seen them on TV several times, from Mythbusters to racing shows, to bizarre foods, to a new one about the bike couriers in NYC.
I have a GoPro as we speak. I will use that camera right away but need to familiarize myself with the hardware.
My only issue with that camera choice was the inability to replay the footage and see what needs to be shot over or the ability to play it back over a TV or similar.
I have the GoPro HD.
Is there a way to use the camera without the fish-eye lens? Everything I see with with the fish-eye look which is not preferable in my case.
Now of your budget is over 1k then we can talk better cameras ;)
Currently testing a Sony PMW-F3. Its the new Sony HD camera that can handle all kinds of lenses (PL yada yada).
We generally use the high-end stuff here at work e.g. RED MX but at times we have to purchase and assess lower end cameras for other depts.
If you need something to be safe around or in water, you cant go wrong with the GoPro. It impresses me more every time I use it. It isn't the most user friendly, but "bang for your buck" is, IMO, off the chart.
Ive been playing with one for a little over a month and it does some awesome stuff. Since I've had it I have seen them on TV several times, from Mythbusters to racing shows, to bizarre foods, to a new one about the bike couriers in NYC.
I have a GoPro as we speak. I will use that camera right away but need to familiarize myself with the hardware.
My only issue with that camera choice was the inability to replay the footage and see what needs to be shot over or the ability to play it back over a TV or similar.
I have the GoPro HD.
Is there a way to use the camera without the fish-eye lens? Everything I see with with the fish-eye look which is not preferable in my case.
Beanoir
Apr 19, 04:57 AM
Autobrite G101.... :eek:
shardey
Mar 21, 02:37 PM
Hey guys, sorry if this question is asked often.
I have an iPod Touch 4G that I had jailbroken on 4.2.1, but I messed with some system files that I shouldn't have messed with and I had to restore and update to 4.3. Is there anyway I can downgrade to 4.2.1 so I can jailbreak again?
Yeah you can if you have a backup that isn't the current update. Also you can manually install any version of the firmware that is compatible with the phone.
http://www.redmondpie.com/how-to-downgrade-ios-4.2.1-to-4.1-4.0.2-4.0.1-on-iphone-4-3gs-3g-ipod-touch-and-ipad/
I have an iPod Touch 4G that I had jailbroken on 4.2.1, but I messed with some system files that I shouldn't have messed with and I had to restore and update to 4.3. Is there anyway I can downgrade to 4.2.1 so I can jailbreak again?
Yeah you can if you have a backup that isn't the current update. Also you can manually install any version of the firmware that is compatible with the phone.
http://www.redmondpie.com/how-to-downgrade-ios-4.2.1-to-4.1-4.0.2-4.0.1-on-iphone-4-3gs-3g-ipod-touch-and-ipad/
Che Castro
May 4, 05:20 PM
Verizon iphone has no airplay ?
Wow that sucks
Wow that sucks
wanchu83
Apr 14, 02:37 PM
I have iphone 4 white and my front is little bit yellowish or lemonish compared to back plate.
Do they still make it this way or did they correct it and it matches the white rim of backplate(real white color)?
Do they still make it this way or did they correct it and it matches the white rim of backplate(real white color)?
john123
Nov 21, 12:10 AM
Well you can't really ban anyone forever...
The most you can do is block the IP(s) that person uses and/or deactivate that person's account.
No matter...we need to build back up an old school army!
The most you can do is block the IP(s) that person uses and/or deactivate that person's account.
No matter...we need to build back up an old school army!
Broc27
Apr 26, 05:58 PM
Basically the Mac Pro comes in two different fundamental configurations: a single CPU version and a dual CPU version. These are two different chipsets and unless you reeeally like overspending it is not wise to change this later.
Consider your needs and first of all determine if the software you'll be using can take advantage of a high number of cores. If you don't know a google or forums search can help, you can also ask about specific software here.
Once you have determined how many cores you need (or want) you can go straight to the model you need (stock or customized at the apple online store) or, if you are feeling adventurous, you can, as you are proposing, buy a single cpu or dual cpu model and upgrade it with very specific processors. If you want a dual CPU model you CAN'T mix different processors; they have to be identical. If you buy a single CPU model you CAN'T add another CPU later unless you also change the chipset, which is, as I said, very expensive.
I'd say more here about which CPUs you can upgrade to but I think you first need to determine your actual needs and your budget.
Consider your needs and first of all determine if the software you'll be using can take advantage of a high number of cores. If you don't know a google or forums search can help, you can also ask about specific software here.
Once you have determined how many cores you need (or want) you can go straight to the model you need (stock or customized at the apple online store) or, if you are feeling adventurous, you can, as you are proposing, buy a single cpu or dual cpu model and upgrade it with very specific processors. If you want a dual CPU model you CAN'T mix different processors; they have to be identical. If you buy a single CPU model you CAN'T add another CPU later unless you also change the chipset, which is, as I said, very expensive.
I'd say more here about which CPUs you can upgrade to but I think you first need to determine your actual needs and your budget.
No comments:
Post a Comment